TSP
Sampling Procedures For TSP sampling, the following
changes must be made to the filter holder:
-
Remove the
impactor(s) from the preseparator assembly and multiple impactor
adapter; remove the adapter.
-
Clean the cap and
preseparator assembly every 2-4 sampling periods, or more frequently if
soiling is observed.
-
After the sampler
has been assembled, calibrated, verified to be in proper working order,
and a filter loaded in the filter holder assembly, set flow rate
adjustment in accordance with procedures as shown in the Operation
Manual.
-
Follow all other
procedures in the Operation Manual, noting that TSP is
being sampled.
|
|
|