sample_conditioning

SHAW 露點濕度計用試樣氣體前處理裝置

SU4 - Sample Conditioning Unit.

The SU4 will reduce the pressure from the dryer to give a flow suitable for measurement. It combines a pressure reduction control, sensor holder and a flow meter for up to 10 litres per minute. (1-2 litre is usual for continuous use).

Moisture measurement under pressure will not give the correct answer but room pressure used in the SU4 will read correctly.

Description:	Sample Conditioning Unit, for wall mounting, comprising pressure regulator, flow indicator, and sensor holder mounted on a stove enamelled backplate. Conditions flow of sample gas to the required 2-10 litres per minute at near atmospheric pressure for accurate and consistent sampling. Pneumatic connections with a choice of 1/8", 1/4" or 6mm compression fittings if required for inlet and outlet. 4 x 5mm mounting holes at 240 x 140mm (H x W rectangle).
Dimensions / Weight:	Overall dimensions: 260mm x 160mm x 135mm depth. Weight: 1.6-1.8Kg approx.
Sampling Options:	Input Pressure (pr): Upto 20Bar (Lo), 200Bar (Med), 400 Bar (Hi).
Options:	Filter Unit. (for 20 and 200Bar variants only) Firtree fittings for 6mm i.d. hose (low pressure only typically <8 Bar)
To Order:	SU4-Lo (1/8", 1/4" or 6mm fittings) for 20 Bar variant SU4-Me (1/8", 1/4" or 6mm fittings) for 200 Bar variant SU4-Hi (1/8", 1/4" or 6mm fittings) for 400 Bar variant (Please state required fittings with order)