水質分析空氣污染及環境保護監測儀器 Water analysis and Environmental Protection  
 
 

 

     

 

  非擴散性紫外線吸收方式空氣中臭氧濃度分析儀
NON-DISPERSIVE UV-ABSORPTION OZONE ANALYZERS (GAS PHASE)

 

空氣中臭氧濃度分析儀  

 型 號: GM-PRO

應 用 範 圍  /  APPLICATIONS

 

詳細資料下載 (PDF 696 KB)

 

Non dispersive UV absorption analyzer for ozone gas in industrial and lab  analyzing. The analyzer also can be used for tough and rigid environment.

- Measuring range up to 300 O³ /M³ (25% w/w)
- Fast and high accurate measurement (for energy-saving control of generator).
- Advanced microprocessor technology.
- All parameters software programmable.
- Graphical data and trend display.
- Serial and analog output standard.

高濃度臭氧測定儀. 0-25% w/w. 圖譜Trend 數字顯示.

   
空氣中臭氧濃度分析儀  

 型 號: GM-OEM

應 用 範 圍  /  APPLICATIONS

詳細資料下載 (PDF 111 KB)

Continuous process UV ozone monitor for measurement of ozone in air or oxygen at high concentrations.

- Measuring range: 0-199.9 gO³ / m³ (SI-Unit).
- Accuracy: 1 % of scale end.
- Response time: < 1 s.
- Output: 0-20 mA, linear

OEM 機型

 

非擴散性紫外線吸收方式空氣中臭氧濃度分析儀

NON-DISPERSIVE UV-ABSORPTION OZONE ANALYZERS (GAS PHASE)
   
空氣中臭氧濃度分析儀

 型 號: MP

應 用 範 圍  /  APPLICATIONS

詳細資料下載 (PDF 219 KB)

Continuous process UV ozone analyzer  for measurement of ozone in air or oxygen at low concentrations.

The ozone monitor OZOMAT MP Multi-range is designed to cover the complete measuring range from 0-2 g O³ /m³ (0-1 pm v/v) up to 0-20 g O³ /m³ (0-1.6% w/w). This is done with the same accuracy and reliability as all our products, but it replaces two (or three) units necessary in the past.

The OZOMAT MP Multi-range can be used as a single monitoring system or in combination with the sampling point selector PERIPHERAL MUS.

MP系列, Single / Multi 範圍可選擇. 

 

連續偵測化學發光方式空氣中臭氧濃度分析儀

CONTINUOUS CHEMILUMINESCENT PROCESS OZONE ANALYZERS (GAS PHASE)
   
空氣中臭氧濃度分析儀

 型 號: LUM

應 用 範 圍  /  APPLICATIONS

詳細資料下載 (PDF 108 KB)

Continuous chemiluminescent process ozone analyzers for measurement of ozone in waste and ambient air at very low concentration.
 
- Measuring range: 0 to 500 ppb. (1000 µg O³/m³).
- Minimum detectable concentration: 1 ppb.
- Automatic calibration option via internal UV source.
 
 

 

電解電流感應方式設置或攜帶型空氣中臭氧濃度分析儀

AMPEROMETRIC OZONE SENSOR (GAS PHASE)
 

定置型空氣中臭氧濃度分析儀  

 型 號: SEN-6060

應 用 範 圍  /  APPLICATIONS

詳細資料下載 (PDF 309 KB)

Stationary ozone measuring instrument for the hazardeous leackage.

- Display of measuring value 0.01 to 1.00 ppm O³.
- Red signal lamp and bleep signal at 1 TLV (0.1 ppm); signals at 2 TLV (0.2 ppm) with
  doubled frequency.
- Temperature compensation.
- Automatic zero point adjustment.

 

   
攜帶型空氣中臭氧濃度分析儀  
型 號: SEN-P 應 用 範 圍  /  APPLICATIONS

詳細資料下載 (PDF 309 KB)

Mobile ozone measuring instrument for the hazardeous leackage.

- No crosswise sensitivity of Nitrogen Oxides.
- Display of measuring value 0.01 to 1.00 ppm O
³.
- Red signal lamp and bleep signal at 1 TLV (0.1 ppm); signals at 2 TLV (0.2 ppm) with
  doubled frequency.
- Temperature compensation.
- Automatic zero point adjustment.

非擴散性紫外線吸收方式水中臭氧濃度分析儀

NON-DISPERSIVE UV-ABSORPTION ANALYZERS WITH DESORBER (WATER PHASE)
   
水中臭氧濃度分析儀  
型 號: WP 應 用 範 圍  /  APPLICATIONS

詳細資料下載 (PDF 376 KB)

The Ozomat WP is suitable for any kind of water and is used for process control.

The patented Ozomat WP measuring process was developed by Anseros particularly for selective detection of low residual concentrations of ozone in water. It can be used advantageously for moderate and very high concentrations, even for concentrated ozone in water up to 200 g O³/m³ H²O.

 

 

水中臭氧測定儀

 

電解電流感應方式水中臭氧殘餘濃度分析儀

AMPEROMETRIC OZONE DETECTOR (WATER PHASE)
   
線上監測水中臭氧濃度分析儀  
型 號: TIZ 應 用 範 圍  /  APPLICATIONS

詳細資料下載 (PDF 402 KB)

For measure residual ozone in water.

Model Description:

  • 200     Transmitter (only indicating and recorder output)

  • 202-A  With integrated controller (2 set-points plus alarm)

  • Options:
    - serial interface RS485
    - Front door (front protection class IP 55 / NEMA 4)
    - Plastic front cover
    - Wall-mounting enclosure

 

非擴散性紫外線吸收方式水中臭氧濃度連續監測儀

NON-DISPERSIVE UV-ABSORPTION MONITOR (WATER PHASE)
   
水中臭氧濃度分析儀  
型 號: WM 應 用 範 圍  /  APPLICATIONS

詳細資料下載 (PDF 221 KB)

ND-UV-process photometer for continuous measurement of ozone in DI-water at high concentration. Metal free for high purified applications. e.g. semiconductor industry.

APPLICATIONS:
- Measurement of dissolved ozone in aqueous solutions.
- DI - and RO -Water systems as well as water purification systems.
- Acid-containing (industrial) solutions (HF, ) H
²SO4.
-
Wet chemical processes in semiconductor processing.

 

v  建成科學儀器股份有限公司     |      網 址: www.ssco.com.tw    |      服務電話(02) 29103818     |     傳 真(02) 29101316 v